D3 Antminer Alternative coin mining system 6 set available for sale.

Hash Rate: 19G/s, Can Overclock to 22G/s (+-5%)

Power: 820W (wall power +-5%)

Dimensions: 38cm x 18cm(h) x 15cm(w)

Packaging Dimensions: 50cm x 30cm(h) x 30cm(w)

Weight: 5KG

Interface: Lan(100m/1000m)

Fan: 2 x 14038 Double ball fan (55DB)

Operating Temperature: 0℃~40℃


PSU Included 110V-220V


NO return

180 days manufacturers warranty.


a) Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp).

c) Dimensions of the miner: 320*130*190mm

d) Hashing algorithm: X11


Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.


Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.


All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!


Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.